User Tools

Site Tools


h:hang-platen

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

h:hang-platen [2018/03/30 02:06] (current)
Line 1: Line 1:
 +<< [[contents:​index| Dictionary Index]] << [[contents:​h|Definitions under H]]
  
 +----
 +
 +====== Hang the Platen ======
 +
 +To tie the [[p:​platen|platen]] to the [[h:​hose-hooks|hose hooks]], in a wooden press. ​
 +
 +To perform this it is usual to lay on the [[p:​press-stone|press stone]] a form of solid type, and to turn the [[t:​tympan|tympans]] down upon it, to place the platen in its place, square with the press, to pull the [[b:​bar|bar]] home, and to keep it in this situation by a [[l:​letter-board|letter board]] placed so as to take a bearing against the shoulder of the bar close to the handle, and also against the [[o:​off-cheek|off cheek]].
 +
 +But I prefer a piece of wide [[f:​furniture|furniture]] with a notch cut in one end for the bar, and the other end against the off cheek, as it is more secure and less liable to be displaced; then to make a noose on a piece of laid cord, place this on one of the front hose hooks, and take a turn round the corresponding platen hooks, and continue these turns till a sufficient quantity of cord is wound round the hooks.
 +
 +Take a hitch round one of the hooks to prevent the cord slipping, then begin to wind the cord round these layers, every two or three turns drawing it tight by taking a turn round a short piece of broad or narrow furniture, by means of which it may be drawn more forcibly, so as to bring the parts together, which makes it so firm that there is no danger of its giving way; the end may then be fastened to one of the hooks. The same process is repeated at the opposite angle, behind the press; then at the two other angles; the platen is then firmly hung, and is ready for work. The same process is observed in iron presses, with the exception that the platen is not tied with cord; it is attached to the press by means of screws. ​
 +
 +
 +[<6>]